Improves QUALITY & APPEARANCE by cleaning & grading dirty raw material of seeds, grains, pulses & spices.
- Two ton holding bin (optional) with High & low material level sensors to automatically switch on & off the feeding elevator for saving power.
- Adjustable feed control gate.
- Adjustable vibrating feeder with A.C. Drive for uniform & widthwise equally distributed feeding on screens.
Aspiration Section :
- Two independently adjustable air liftings effectively remove light impurities like dust, insect, trash, chaff, sticks, stems, light & insect-eaten seeds etc. to two separate outlets.
- Cyclone dust collector avoids blowing of irritable fines to maintain good health of men & machinery.
Screening Section :
- One sand removal screen.
- Three screens (top scalping, middle + bottom grading) separate the material into four size fractions : Impurities : Over-size & Under-size Good Seeds : Bold & medium
- Best quality hard screens having more No. of holes / inch, accurate & uniformly sized holes, double side polish surface. M.S. framed long & wide screens are interchangeable. Select perforation size and shape as per the crop.
- Adjustable screen slope for adjusting retention time of seeds over screens as per the amount of under-size impurities present in the lot.
- Adjustable screen speed to mach with the flow pattern of different crops for better screening.
- Automatic Screen-slope & Feed-Rate Synchronizer to adjust the
feed- rate according to the screen-slope to maintain the thickness of seed layer over the screens.
- Adjustable Screen-Cleaning Mechanisms to avoid screen chocking. For Top scalping screen : Two rubber-molded hammers with adjustable stroke. For Middle & bottom grading screens : 12 Nos. or 16 Nos. changeable nylon-brushes molded in iron channels.
- Sturdy construction. Oil-filled & counter-weight-balanced eccentric mechanism for trouble-free long life.
- Compact screen rack (optional) for safe storage of additional screens.
- Capacity depends on type of seeds & quality.
|Capacity||2 – 3 TPH||3 – 4 TPH|
|Power 3 -Ø, A.C.||10 hp m/c + 0.25 hp Feeder
(Actual running 5.5 hp)
|10 hp m/c + 0.25 hp Feeder
(Actual running 6.5 hp)
|Screen Size (mm x mm)
Top, Middle & Bottom
|1440 L x 1095 W||1940 L x 1095 W
35 % Extra Long Grading
|Nylon-Brushes||12 Nos.||16 Nos.|